The Patented Newmac Balanced Flue Sealed Vent System (SVS) is the latest technology for venting of Newmac appliances.

System features:

• Combined single wall terminal for both burner combustion air and flue exhaust gases
• All stainless steel construction
• Zero clearance to combustibles for terminal installation
• Serviceable seals permit vent cleaning and inspection as codes require
• Exceptionally quiet operation
• Multi fire range of 0.5 - 1.50 U.S.G.P.H. - designed for Newmac appliances
• Flue gases jetted away from building exterior
• Pre-heated combustion air
• Superior wind performance
• Positive blockage safety sensor
• Reduced standby losses in boilers
• No moving parts to maintain
• Truly sealed system - no vacuum relief valve required
• System uses a pre and post purge burner cycle for complete flue gas removal
• Safety certified by CSA
  

Click here for SVS Flex Vent Assembly Instructions

---

Specifications

SVS Burner Approvals: Designed for sealed combustion

Terminal Specifications

Through the wall hole opening 7 in. x 7 in.
Siding recess for head 12 1/4 in. x 12 1/4
Max siding recess depth 1 in.
Max wall thickness (excluding siding) 10 in.
Max height from appliance 10 ft.
Min height from appliance breech 0

Oil Flex Vent Pipe

Maximum vent length 20 ft
Minimum vent length –
Minimum inside bend radius 1 ft.
Support spacing 3 ft.
Minimum gradient 1/4 in./ft. toward appliance breach


1 Servicable Connections
2 SVS Terminal
3 Combustion Air
4 Flexible Flue Pipe
5 Blockage Control